Material Lists

347400

Logo scheda prodotti BTicino

Interface for the conversion of the coaxial signal into a 2 wires BUS signal. It can be used to connect to the BUS of the 2 wires video door entry system a camera with coaxial video output powered at 12 Vdc, with maximum absorption 150 mA and 1 Vpp video output (75 ohm). The device must be configured using physical configurators

Technical features
Brand
BTicino
Rated voltage
12Vac
Dimensions
40 x 40 x 18mm
Width
40mm
Length
40mm
Depth
18mm
Cabling
SCS-BUS
Plant type
2 fili / 2 wires
Operating temperature
5 - 40°C
Series EN
Accessories
We, BTicino S.p.A Viale Borri 231 21100 Varese (Italy), declare that all items listed in BTicino catalogues, have been manufactured in compliance with the principal elements of safety objectives of European Directive said LVD: 2014/35/EU: 26 February 2014 and, where requested, also in compliance with essential protection requirements of electromagnetic compatibility according to European Directive 2014/30/EU: 26 February 2014, and/or where requested also in compliance with 1995/5/CE: 9 March 1999 “R&TTE” or where requested also in compliance with 2014/53/EU: 16 April 2014 “RED”. BTicino S.p.A. products are in compliance with the standard published by the International Electrotechnical Commission (IEC). The compliance can be proved by Certificates issued by organizations recognized by IEC according to the CB-scheme. Our items comply with relevant European Product- Standards and show, whether provided, CE marking, they have been constructed in accordance with good engineering practice in safety matters in force in the Community, they do not endanger the safety of persons, domestic animals or property when properly installed and maintained and used in applications for which they were made.
Save the product sheet in .pdf Share via Whatsapp Share via email
Add to one of your lists:
Add product